Filter
Top Products
Rear Panel
1. USB 2.0 connectors — Supports devices such as USB storage devices and printers.
2. Gigabit Ethernet Ports — High-speed Ethernet connectors that will automatically detect your network
speed (10/100/1000Base-T).
3. Reset Button — Hold the Reset button for four seconds to reset security and network settings. This
allows you to regain access if network settings are incorrect or you’ve forgotten your password.
The reset button does not initiate a full factory reset. To perform a full factory reset, select Factory
Reset from the System page in the px6-300d Management Console.
4. Power Connector — Plug the power cable into this connector.
5. Security Lock — Connect security cable to protect your px6-300d from theft.
Default Settings
IP Address — If no DHCP server is found on your network the px6-300d will get a self-assigned IP
address in the 169.254.x.x range.
Device Name — The default name for your px6-300d Network Storage is px6-300d. If there are more than
one px6-300d on your network, a number is added to the name, such as px6-300d-1 px6-300d-2, and so on.
Default Shares — Backups, Documents, Movies, Music, Pictures
HardwareManagement
137 About the px6-300d Network Storage Components