Filter
Top Products
Configuring the Switch
3-134
3
Command Attributes
• Port – Port identifier.
• Name
15
– Name of ACL.
• Type – Type of ACL (IP or MAC).
• CoS Priority – CoS value used for packets matching an IP ACL rule. (Range: 0-7)
• ACL CoS Priority Mapping – Displays the configured information.
Web – Click Priority, ACL CoS Priority. Enable mapping for any port, select an ACL
from the scroll-down list, then click Add.
Figure 3-81 ACL CoS Priority
CLI – This example assigns a CoS value of zero to packets matching rules within
the specified ACL on port 24.
15. For information on configuring ACLs, see page 3-57.
Console(config)#interface ethernet 1/24 4-108
Console(config-if)#map access-list ip bill cos 0 4-95
Console(config-if)#