Filter
Top Products
Operation and Status
Connection Status - PPTP
If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example
will be displayed when the "Connection Details" button is clicked.
Figure 22: PPTP Status Screen
Data - PPTP Screen
Connection
Physical Ad-
dress
The hardware address of this device, as seen by remote
devices on the Internet. (This is different to the hardware
address seen by devices on the local LAN.)
IP Address
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
Connection
Status
• This indicates whether or not the connection is currently
established.
• If the connection does not exist, the Connect button can be
used to establish a connection.
• If the connection currently exists, the Disconnect button
can be used to break the connection.
• Normally, it is not necessary to use the Connect and
Disconnect buttons unless the setting "Connect automati-
cally, as required" is disabled.
39