Filter
Top Products
Wireless Broadband router User Guide
Rear Panel
Figure 3: Rear Panel
Antenna
2dBi detachable antenna.
WAN
Connect the DSL or Cable Modem here. If your modem came
with a cable, use the supplied cable. Otherwise, use a stan-
dard LAN cable.
LAN
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
If required, any port can be connected to another hub. Any
LAN port will automatically function as an "Uplink" port when
necessary.
Reset Button
This button has two (2) functions:
• Reboot. When pressed and released, the Wireless
Broadband router will reboot (restart).
• Clear All Data. This button can also be used to clear ALL
data and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. Power Off.
2. Hold the Reset Button down while you Power On.
3. Keep holding the Reset Button for a few seconds, until the
RED LED has flashed TWICE.
4. Release the Reset Button. The Wireless Broadband router
is now using the factory default values.
Power port
Connect the supplied power adapter here.
6