Filter
Top Products
Advanced Administration
Properties
• Destination IP Address - The network address of the
remote LAN segment. For standard class "C" LANs, the
network address is the first 3 fields of the Destination IP
Address. The 4th (last) field can be left at 0.
• Network Mask - The Network Mask for the remote LAN
segment. For class "C" networks, the default mask is
255.255.255.0
• Gateway IP Address - The IP Address of the Gateway or
Broadband router which the Wireless Broadband router
must use to communicate with the destination above.
(NOT the broadband router attached to the remote seg-
ment.)
• Metric - The number of "hops" (broadband routers) to pass
through to reach the remote LAN segment. The shortest
path will be used. The default value is 2.
Buttons
Save
Save the RIP setting. This has no effect on the Static Routing
Table.
Add
Add a new entry to the Static Routing table, using the data
shown in the "Properties" area on screen. The entry selected
in the list is ignored, and has no effect.
Update
Update the current Static Routing Table entry, using the data
shown in the "Properties" area on screen.
Delete
Delete the current Static Routing Table entry.
Clear Form
Clear all data from the "Properties" area, ready for input of a
new entry for the Static Routing table.
Generate Report
Generate a read-only list of all entries in the Static Routing
table.
Configuring Other Broadband routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed to the
Wireless Broadband router, so that they can be forwarded to the external LAN, WAN,
or Internet. To achieve this, the local LAN must be configured to use the Wireless
Broadband router as the Default Route or Default Gateway.
Local Broadband router
The local broadband router is the Broadband router installed on the same LAN seg-
ment as the Wireless Broadband router. This broadband router requires that the
Default Route is the Wireless Broadband router itself. Typically, broadband routers
have a special entry for the Default Route. It should be configured as follows.
Destination IP Address
Normally 0.0.0.0, but check your broadband router
documentation.
Network Mask
Normally 0.0.0.0, but check your broadband router
documentation.
Gateway IP Address
The IP Address of the Wireless Broadband router.
89