Lexmark 28D0500 Printer User Manual


 
Select from the following content sources:
Black/White Laser—The original document was printed using a mono laser printer.
Color Laser—The original document was printed using a color laser printer.
Inkjet—The original document was printed using an inkjet printer.
Magazine—The original document is from a magazine.
Newspaper—The original document is from a newspaper.
Other—The original document was printed using an alternate or unknown printer.
Photo/Film—The original document is a photo from film.
Press—The original document was printed using a printing press.
Page Setup
This option lets you change the following settings:
Sides (Duplex)—This specifies if the original document is printed on only one side or on both sides of the paper.
Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and
Binding settings to match the orientation.
Binding—This specifies if the original document is bound on the longedge or shortedge side.
Transmission Log
This option lets you print the transmission log or transmission error log.
Scan Preview
This option lets you view the first page of the image before it is included in the file. When the first page is scanned, the
scanning is paused and a preview image appears.
Note: This option appears only when a formatted, working printer hard disk is installed.
Edge Erase
This option lets you remove smudges or any mark around the edges of a document. You can remove an equal area
around all four sides of the paper, or you can pick a particular edge. Edge Erase also removes whatever is within the
area selected, leaving nothing on that portion of the scan.
Advanced Imaging
This option lets you adjust the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror Image,
Negative Image, Scan Edge to Edge, Shadow Detail, and Sharpness settings before you scan the document.
Custom Job
This option lets you combine multiple scan jobs into a single job and appears only when a working printer hard disk is
installed.
Scanning 121