Lexmark 28D0500 Printer User Manual


 
The print job is sent from a flash drive that is no longer attached to the USB port.
The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer
model.
Note: The printer hard disk and the flash drive are supported only in select printer models.
From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press
to confirm.
Defective flash detected [51]
Try one or more of the following:
Replace the defective flash memory card.
From the printer control panel, select Continue to ignore the message and continue printing. For nontouchscreen
printer models, press
to confirm.
Cancel the current print job.
Disk full [62]
Try one or more of the following:
From the printer control panel, touch Continue to clear the message and continue processing.
Delete fonts, macros, and other data stored in the printer hard disk.
Install a printer hard disk with larger capacity.
Disk must be formatted for use in this device
From the printer control panel, touch Format disk to format the printer hard disk and clear the message.
Note: Formatting deletes all the files stored in the printer hard disk.
Error reading USB drive. Remove USB.
An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.
Error reading USB hub. Remove hub.
An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
Incompatible tray [x] [59]
Remove, and then reinstall the indicated tray to clear the message.
Troubleshooting 258