Filter
Top Products
Non-Lexmark [color] [supply type], see User's Guide [33.xy]
Note: The supply type can be toner cartridge or the imaging kit.
The printer has detected a non‑Lexmark supply or part installed in the printer.
Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies
or parts may affect the performance, reliability, or life of the printer and its imaging components.
All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if
third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark
printer or its associated components.
Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage. Damage caused by
the use of third-party supplies or parts may not be covered by the warranty.
To accept any and all of these risks, and to proceed with the use of non-genuine supplies or parts in your printer, press
and hold
and the # button on the printer control panel simultaneously for 15 seconds.
For non‑touch‑screen printer models, press
and simultaneously for 15 seconds to clear the message and
continue printing.
If you do not wish to accept these risks, then remove the third-party supply or part from your printer, and then install
a genuine Lexmark supply or part.
Note: For the list of supported supplies, see the “Ordering supplies” section of the User's Guide or visit
www.lexmark.com.
Reinstall missing or unresponsive [color] cartridge [31.xy]
Try one or more of the following:
• Install the missing toner cartridge. For more information, see the “Replacing supplies” section of the User’s Guide.
• Remove the unresponsive cartridge, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the cartridge may be defective. Replace the
cartridge.
Reinstall missing or unresponsive [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Try one or more of the following:
• Install the missing imaging kit. For more information, see the “Replacing supplies” section of the User’s Guide.
• Remove the unresponsive imaging kit, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the imaging kit may be defective. Replace the
imaging kit.
Troubleshooting 263