Filter
Top Products
Auto Sheet Feeder Device (F4)
F4
F4
The device has an
F4
by itself in the upper left corner of the device.
This device is used for automatic feeding and printing of cut forms.
It can feed paper from one of three bins or a manual insertion slot.
The Auto Sheet Feeder Device (F4) consists of two parts: (1) a
forms transport device
(shown above) that mounts inside your
printer, and (2) a
sheet feeder
that sits in front of the printer on the
same table.
See “Setting Up Your 4232 Printer Model 302 with ASF” in
IBM 4232
Printer Model 302 Auto Sheet Feeder General Information
for
information on setting up and operating this device.
Chapter 2. Getting to Know Your Printer 2-19