Filter
Top Products
Status Codes
Continuous Forms Device (F1) and Dual Purpose Forms Device
(F2):
1. Press Stop.
2. Load forms.
3. Be sure that the forms are loaded correctly and that they are
under the blue forms guide/forms sensor.
4. Be sure that nothing blocks the blue forms guide/forms
sensor.
5. Reset the top of form position.
6. Press Start.
Document Insertion Device (F3) and Auto Sheet Feeder Device
(F4):
1. Press Stop.
2. Press Load/Eject.
3. Load the correct form size, or
4. Check the maximum page length setting and correct it; then
reload the form and restart the print job (see “Introducing the
4232 Printer Model 302” in
IBM 4232 Printer Model 302 Product
and Programming Description
for more information on the
maximum page length setting).
1 END OF FORMS
LOAD FORMS
Appendix B. Problems B-3