Filter
Top Products
Printer Configuration
You can print the current values for each parameter. Each
parameter is shown with its corresponding value printed to the right.
The category and parameter names are printed in the current Display
Language used on the operator panel. See Figure 4-1 on
page 4-10 and Figure 4-2 on page 4-11 for sample printouts.
Printer configurations can be checked by entering the configuration
menus.
To print the printer configuration:
1. Enter the Operator Print Tests (see “General Test Instructions”
on page 4-1).
The printer displays
2. Press Scroll ↑ or Scroll ↓ until the printer displays
3. Press Enter or Start to begin the test.
The Ready indicator goes on and printing begins. The printout
shows the current configuration. The configuration printout is
complete when the Ready indicator goes off.
4. The printer returns to the Operator Print Tests menu
automatically when the configuration printout is complete.
5. Press Cancel Print to make the printer
ready
or Return to make
the printer
not ready
(see “General Test Instructions” on
page 4-1).
OPERATOR PRINT TESTS
Printer Demonstration
OPERATOR PRINT TESTS
Printer Configuration
Chapter 4. Tests 4-9