Filter
Top Products
print language 2-13
print mode 2-13
print quality adjustments
F1 (Continuous Forms
Device) 1-35
F2 (Dual Purpose Forms
Device) 1-67
F3 (Document Insertion
Device) 1-98
print tests
bidirectional adjustment 4-15
left margin alignment 4-6
print verification 4-12
printer configuration 4-9
printer demonstration 4-3
print verification test 4-12
printer
configuration (print test) 4-9
demonstration (print test) 4-3
left margin (print test) 4-6
problems 1-13
verification (print test) 4-12
printer settings 2-13
printer setup
check out ribbon cartridge
installation 1-9
F1 (Continuous Forms Device)
check out F1 forms device
installation 1-20
install the 1-18
load forms in the F1 forms
device 1-23
prepare to load F1
forms 1-21
print verification test for the F1
forms device 1-30
F2 (Dual Purpose Forms Device)
check out F2 forms device
installation 1-55
install the 1-53
load forms in the F2 forms
device 1-57
printer setup
(continued)
F2 (Dual Purpose Forms Device)
(continued)
prepare to load F2
forms 1-56
print verification test for the F2
forms device 1-63
F3 (Document Insertion Device)
check out F3 forms device
installation 1-87
install the 1-85
load forms in the F3 forms
device 1-91
prepare to load F3
forms 1-90
print verification test for the F3
forms device 1-95
install the ribbon cartridge 1-6
introduction 1-1
parts checklist 1-2
prepare for installation
forms device 1-12
ribbon cartridge 1-6
printer problems 1-13
ribbon guide installation 1-8
problem determination 2-20, A-7
problem list (no status code
displayed)
forms problems
do not advance or overprint
occurs B-27, B-29
do not feed into printer B-30
do not stack B-31
erratic or intermittent forms
movement B-31
miscellaneous problems
characters off
registration B-32
first print character in wrong
place B-36
overprinting B-27
Index X-11