Filter
Top Products
Guideline for Training
To introduce a new operator to the printer, use the following steps as
a guideline. Change the steps, as needed, to suit your working
environment and the operator’s level of responsibility.
1. Show the operator this guide and discuss the contents of
Chapter 1, “Setting Up the 4232 Printer Model 302.”
2. Show the operator
IBM 4232 Printer Model 302 Quick Reference Guide
IBM 4232 Printer Model 302 Operator Panel Instructions
and discuss the contents of each.
3. The power cord should be unplugged before connecting or
disconnecting the signal cable. See Chapter 1, “Setting Up the
4232 Printer Model 302” for the proper sequence.
4. Show the operator how to install the forms device with emphasis
on identifying the type of forms device (F1, F2, F3, or F4). Show
the operator where the procedures are in Chapter 1, “Setting Up
the 4232 Printer Model 302” or in
IBM 4232 Printer Model 302
Auto Sheet Feeder General Information
(depending on the forms
device installed).
5. Show the operator how to set the forms device number. Show
the operator where the procedures are in Chapter 1, “Setting Up
the 4232 Printer Model 302” or in
IBM 4232 Printer Model 302
Auto Sheet Feeder General Information
(depending on the forms
device installed).
Appendix A. Training Guideline A-3