Filter
Top Products
Installing and Using the Continuous Forms Device
(F1)
The following sections describe how to install and use the
Continuous Forms Device (F1).
Note: Make sure that the proper forms device is configured. See
“Preparing for Forms Device Installation” on page 1-10 for the exact
steps.
Installing the Continuous Forms Device (F1)
To install the F1 forms device, follow these steps:
1. Hold the forms device so that the
device number
F1 is in the
upper left corner facing you. Note the
bottom metal bar
and the
clips
; they will be important later.
2. Remove the orange shipping clip, if installed.
Important
The F1 forms device for the 4232 Printer Model 302 has a
circle around the F1 emblem. Use only these forms devices
in the printer.
Top of Forms Device
Bottom Metal Bar
Clips
F1
Tensioner Plates
1-18 User’s Guide Model 302