Filter
Top Products
Security Audit Log menu
Menu item Description
Export Log
Enables an authorized user to export the security log
Notes:
• To export the log from the printer control panel, a flash drive must be attached
to the printer.
• From the Embedded Web Server, the log can be downloaded to a computer.
Delete Log
Delete now
Do not delete
Specifies whether audit reports of print jobs are deleted
Note: Delete now is the factory default setting.
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of events to log
0–7
Specifies whether and how the audit logs of print jobs are created:
• Enable Audit determines if the printer records events in the secure audit log and
in the remote syslog.
• Enable Remote Syslog determines if the printer sends logged events to a remote
server.
• Remote Syslog Facility determines the facility value that the printer uses when
sending events to the remote syslog server.
• “Severity of events to log” specifies how critical a logged event is. With this log
activated, the printer logs each event with a severity value equal to or less than
the setting value.
0 is Emergency
1 is Alert
2 is Critical
3 is Error
4 is Warning
5 is Notice
6 is Informational
7 is Debug
Notes:
• Yes is the factory default setting for Enable Audit.
• No is the factory default setting for Enable Remote Syslog. If Enable Audit is set
to No, then no records are sent to the remote syslog even if Enable Remote
Syslog is set to Yes.
• 4 - Security is the factory default setting for Remote Syslog Facility.
• 4 is the factory default setting for Severity of events to log.
Understanding printer menus
95