Filter
Top Products
Installing memory and option cards
16
Installing and removing options
Installing a memory card
Follow the instructions in this section to install a printer memory card. Memory cards must have 100-pin connectors.
Note: Memory cards designed for other Lexmark printers may not work with your printer.
1 Remove the system board access cover. For more information, see Removing the system board access cover.
Warning: Memory cards are easily damaged by static electricity. Touch something metal on the printer before
you touch a card.
2 Unpack the memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
3 Push open the latches on both ends of the memory connector.
4 Align the notches on the bottom of the card with the notches on the connector.
5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6 Make sure each latch fits over the notch on the end of the card.
Latch
Notch
Connection
points
Memory card
connector