Filter
Top Products
Installing memory and option cards
17
Installing and removing options
Installing an “option-added” firmware card
Follow the instructions in this section to install an optional “option-added” firmware or flash memory card.
Note: “Option-added” firmware and flash memory cards offered for other Lexmark printers cannot be used
with your printer.
“Option-added” fiOnly one of each type of card is supported.
Warning: “Option-added” firmware and flash memory cards are easily damaged by static electricity. Touch
something metal on the printer before you touch a card.
1 Remove the system board access cover. For more information, see Removing the system board access cover.
2 Unpack the card.
Avoid touching the metal pins on the bottom of the card. Save the packaging.
3 Holding the card by its sides, align the pins on the card with the holes on the system board.
4 Push the card firmly into place.
The entire length of the connector on the card must touch the system board.
Be careful not to damage the card connectors.
Pins