Filter
Top Products
Removing memory and option cards
23
Installing and removing options
Removing an option card
Complete the following steps to remove an internal print server, Coax/Twinax Adapter, Parallel Interface Card, or Serial
Interface Card.
Warning: Option cards are easily damaged by static electricity. Touch something metal on the printer before
you touch an option card.
1 Remove the system board access cover. For more information, see Accessing the printer system board.
2 Locate the option card.
3 Remove the screw that secures the card to the system board connector slot.
4 Gently pull the card out of the connector.
5 If you saved the metal plate that covers the connector slot and you do not plan to insert another card, attach the
plate.
a Slide the clip side of the plate in first, making sure the clip end covers the groove on the system board.
b Use the screw to secure the other end of the metal plate to the system board.
6 Place the card in its original packaging, or wrap the card in paper and store it in a box.
7 Replace the system board access cover. For more information, see Reinstalling the system board access
cover.
Removing a hard disk
Warning: Hard disks are easily damaged by static electricity. Touch something metal on the printer before you
touch a disk.
1 Remove the system board access cover. For more information, see Accessing the printer system board.
2 Locate the hard disk.