Filter
Top Products
Overview of the Lexmark E120 operator panel
23
Using the operator panels
Short paper
Toner low
Light sequence:
Error—Blinking
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
Ready / Data—Blinks three times
Message:
Paper length is too short to print the formatted data. This occurs
when the printer does not know the loaded media size or when
there is a problem feeding the media.
Solution:
• Make sure the loaded print media is large enough and paper size is set correctly in the Local Printer
Setup Utility paper size menu (see Software and Documentation CD).
• Press to clear message and continue the job.
• Press to cancel print job.
Light sequence:
Error—Blinking
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
Ready / Data—Blinks eight times
Message:
Printer is ready to receive and process data. In addition,
toner in the toner cartridge is getting low.
Solution:
• Press to clear message and continue processing job.
• Remove the toner cartridge. Gently shake the toner cartridge from side to side and front to back several
times to redistribute the toner, and reinsert it. Repeat this procedure multiple times. If the print remains
faded, replace the toner cartridge. See Changing the toner cartridge on page 68 for help.
Primary light
sequence
Secondary light
sequence
Primary light
sequence
Secondary light
sequence