Lexmark 120n Printer User Manual


 
Overview of the Lexmark E120n operator panel
34
Using the operator panels
Complex page
Missing cartridge / Defective cartridge detected
Light sequence:
Continue—On
Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
Continue—On
Ready / Data—On
Error—On
Message:
The page may not print correctly because the print information on the page is too complex (that is, too large for the
printer memory).
Solution:
Press to clear message and continue processing the job (some print data may be lost).
To avoid this error in the future:
Reduce complexity of the page by reducing the amount of text or graphics.
Set Page Protect to On in the Local Printer Setup Utility (see Software and Documentation CD).
Light sequence:
Toner Low/Replace PC Kit—Blinking
Error—On
Secondary light sequence:
Press twice quickly to see the secondary light sequence.
Toner Low/Replace PC Kit—On
Error—On
Paper Jam—Blinking
Message:
Either the toner cartridge is missing, the long-life photoconductor kit is missing, or a defective toner cartridge is
detected.
Solution:
First, check to see if a toner cartridge is installed. If the toner cartridge is properly installed, check to see if a long-
life photoconductor kit is installed. If both are properly installed, then remove the defective toner cartridge. If the
toner cartridge or the long-life photoconductor kit is missing, install the missing item.
Primary light
sequence
Secondary light
sequence
Primary light
sequence
Secondary light
sequence