Lexmark 120n Printer User Manual


 
Overview of the Lexmark E120n operator panel
38
Using the operator panels
Network interface errors
Host interface disabled
Light sequence:
Continue—On
Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
Continue—On
Paper Jam—On
Error—On
Message:
Printer cannot establish communication with the network.
Solution:
Press to clear message and continue printing. (may not print correctly).
Press and hold to reset printer (may need to send the job again).
Light sequence:
Continue—On
Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
Continue—On
Load / Remove Paper—Blinking
Paper Jam—Blinking
Error—On
Message:
Printer USB or network port has been disabled.
Solution:
Press to clear message. The printer discards all jobs previously sent.
Enable the network port by selecting a value other than Disabled for the Network Buffer item in the Local
Printer Setup Utility (see Software and Documentation CD).
Primary light
sequence
Secondary light
sequence
Primary light
sequence
Secondary light
sequence