Filter
Top Products
44
Tray linking does not
work.
Tray linking is not configured
properly.
To configure the linked trays:
• Make sure the Tray x Type value in the Paper
Type menu item in the Paper Menu is the same
for all linked trays.
• Make sure the Tray x Size value in the Paper Size
menu item in the Paper Menu is the same for all
linked trays.
Large jobs do not
collate.
Collate is not set to On. Set Collation to On in the Finishing Menu or
through the printer driver.
The job is too complex. Reduce the complexity of the print job by eliminating
the number and size of fonts, the number and
complexity of images, and the number of pages in
the job.
The printer does not have
enough memory.
Add printer memory or an optional hard disk.
Refer to the Setup Guide for information on selecting
memory options to install.
Unexpected page
breaks occur.
The job has timed out. Set Print Timeout to a higher value from the Setup
Menu.
Symptom Cause Solution