Filter
Top Products
93
Check <device>
Connection
What this message means:
The specified device is either not fully connected to the printer or is experiencing a hardware
failure.
What you can do:
•
Reestablish communication by removing the specified device and reattaching it to the printer.
• In the case of a hardware failure, turn the printer off and back on. If the error recurs, turn the
printer off, remove the specified device, and call for service.
Clearing Job
Accounting Stat
What this message means:
The printer is deleting all job statistics stored on the hard disk.
What you can do:
Wait for the message to clear.
Close Duplex Doors
What this message means:
The printer duplex doors are open.
What you can do:
Close the duplex doors to clear the message.
Close Top Cover
What this message means:
The printer top cover is open.
What you can do:
Close the printer top cover to clear the message.