Filter
Top Products
289Appendix - COR/APO Logic (TN5250e): Details
PAGLNG = A4
and PAGWDT = A4
2 If the page format stated in the FCB is within (or equal to) the
page size settings of the PAGLNG and PAGWDT option settings,
the page size is "valid". In that case the printout will be in
landscape provided the page length is smaller than the width,
otherwise it will be in portrait. In both cases the font selected
by the system is used.
3 If either the page width or the page length from the system
exceeds the page size stated in the SCS/TNe Emulation the
page size is "invalid". The result is a compressed landscape
printout by means of the COR algorithm in the SCS/TNe
Emulation.
• "Vertical spacing" is reduced from normal line spacing
to a percentage value according to the LINSPRED
option setting. Refer to section “COR LSI Reduc (IDB
Option 127)” on page 207.
• Margins (offset) are set according to the LFTOFFCOR
and TOPOFFCOR option settings. Refer to section “Top
Margin COR (IDB Opt. 80 & 81)” on page 234 and to
section “Left Margin COR (IDB Opt. 78 & 79)” on
page 232.