Filter
Top Products
81Operations - Common Setup: Reset TN Session
Reset TN
Session
IMPORTANT:
Powering the printer Off and On does not end
TCP/IP and Telnet sessions in an orderly manner.
To power the printer Off properly, select Menus >
Option Card Menu > SCS/TNe MENU >
COMMON SETUP=> Disconnect Ses >
Disconnect Ses.
See: Disconnect Ses, page 80.
This option disconnects ALL active TNe sessions on TCP/IP level,
restarts the SCS/TNe emulation and reconnects. Use this option
whenever changes have been made to the Network or Server Info
settings to disconnect and reconnect using the new settings.
Operator panel text Comments
Do Not Reset Do not reset any settings. This performs the same
action as if Back had been pressed in the operator
panel.
Reset TN Ses. Disconnect ALL active TNe sessions on TCP/IP
level, restart, and reconnect.