Filter
Top Products
67AS/400 and iSeries Installation Setup: Task 4 - Configuring the SCS/TNe Emulation
You will need to check with your system administrator. The
option setting values found in the table are described in
section “CONNECTION # > SERVER # INFO Menu: Options
Overview” on page 165.
Option Default Value Recommended Value Comments
Name / IPaddress # Use IP#
Address
Check with your system administrator whether you need
to specify the specific IP address or the name of the host
which the printer will contact to receive SCS jobs.
IP # Address 0.0.0.0 The host’s IP
address
In order to make a connection to the host, an IP address
must be entered or a hostname defined.
If you selected Use IP# Address in the Name / IPaddress
# option, enter the appropriate IP Address here.
(This option is not used if you selected
Use Hostname #.)
Hostname # [undefined] Host name on DNS
server
(up to 16 characters)
In order to make a connection to the host, an IP address
must be entered or a hostname defined.
If you selected Use Hostname # in the Name / IPaddress
# option, enter the appropriate hostname here.
(This option is not used if you selected
Use IP# Address.)
Server # TN Port 23 23 Check with your system administrator. Another TCP port
number may be defined for the Telnet service.