Filter
Top Products
60AS/400 and iSeries Installation Setup: Task 2 - Configuring a Print Server
2 Set the Job Timeout. This timeout is used by all print
servers. Select Menus > Network/Ports. Select the print
server to be used for SCS printing, for example Standard
Network. Select Standard Network > Std Network Setup >
Network Card > Job Timeout. Scroll down to 0. Touch
Submit to save.
3 Set the TCP/IP option values shown in the table below.
Select Menus > Network/Ports > Standard Network > Std
Network Setup > TCP/IP. You will need to contact your
network administrator for several of the values. You will need
to contact your network administrator for several of the
values.
Option Value Description
Network
Job
Timeout
"0" This is the recommended setting and corre-
sponds to "disabled". Other settings may cause
communication problems. A setting of "0" allows
the host SNA server, or SCS/TNe emulation
timeout values to control when print jobs from
another protocol, interface, server, or host can be
started.