LG Electronics DCS-932L Webcam User Manual


  Open as PDF
of 60
 
23D-Link DCS-932L User Manual
Section 4 - Web Conguration
Network Setup
Select this connection if you have a DHCP server running on your
networkandwouldlikeadynamicIPaddresstobeupdatedtoyour
camera automatically.
You may obtain a static or xed IP address and other network
information from your network administrator for your camera. A static
IP address will ease you for accessing your camera in the future.
IP Address: ThexedIPaddress
Subnet Mask: The default value is “255.255.255.0.” Used to determine
ifthedestinationisthesamesubnet.
Default Gateway: The gateway used to forward frames to destinations
inadierentsubnet.Invalidgatewaysettingsmaycausethefailureof
transmissionstoadierentsubnet.
Primary DNS: Primary domain name server that translates names to
IP addresses.
Secondary DNS: Secondary domain name server to backup the
Primary DNS.
DHCP:
Static IP Client:
PPPoE Settings:
Port Settings:
UPnP Settings:
This section allows you to congure your network settings.
IfyouareusingaPPPoEconnection,enableitandentertheUserNameandPasswordforyourPPPoEaccount.Youcangetthisinformation
fromyourInternetserviceprovider(ISP).
YoumaycongureaSecondHTTPportthatwillallowyoutoconnecttothecameraviaastandardwebbrowser.Theportcanbesettoa
numberotherthanthedefaultTCPports80.Acorrespondingportmustbeopenedontherouter.Forexample,iftheportischangedto
1010,usersmusttypehttp://192.168.0.100:1010insteadofonly“http://192.168.0.100”.
EnablethissettingtocongureyourcameraasanUPnPdeviceinthenetwork.
 previous next