24D-Link DCS-932L User Manual
Section 4 - Web Conguration
Wireless
ServiceSetIdentier,anidentierforyourwirelessnetwork.
Thedefaultsettingischannel6.Selectthesamechannelthatisbeing
usedbyotherwirelessdeviceswithinyournetwork.Whenthereisan
interferencefromthewirelessnetworksthatoverlapwithoneanother,
you may change the channel to obtain maximum performance for
your connection.
Infrastructure is a wireless connection using an access point as
a transmission point of all wireless devices. Ad-Hoc is a wireless
connection used without an access point, where your DCS-932L
isdirectlyconnectingtoyourPC.Thisisdoneusingtheon-board
wireless adapter on the DCS-932L connected to a wireless adapter
on the PC.
This page will allow you to select a wireless network that the DCS-932L
wasabletodetect.
Forsecurity,therearethreechoices;None,WEP,andWPA-PSK / WPA2-PSK.Selectthesameencryptionmethodthatisbeingusedby
your wireless device/ router.
WEPprovidessecuritybyencryptingdataoveryourwirelessnetworksothatitisprotectedasitistransmittedfromonewirelessdevice
toanother.TogainaccesstoaWEPnetwork,youmustknowthekey.Thekeyisastringofcharactersthatyoucreate.WhenusingWEP,
youmustdeterminethelevelofencryption.Thetypeofencryptiondeterminesthekeylength.128-bitencryptionrequiresalongerkey
than64-bitencryption.
An appropriate Pre-shared Key,whichisneededinordertoconnecttothewirelessnetwork.
SSID:
Channel:
Connection Mode:
Site Survey:
Wireless Security
Mode:
WEP:
WPA-PSK / WPA2PSK
Settings:
This section allows you to setup and congure the wireless settings on your camera.