Filter
Top Products
Operation
27
3.2.4 Status Reports Screens
Go to the Master Menu and move the highlighted cursor to STATUS REPORTS. Press the Select but-
ton and the Status Reports screen is displayed.
The Status Report screen is divided into four submenu reports: PRESENT STATUS, EVENT HIS-
TORY, HISTORY STATUS and SYSTEM STATUS.
To look at any of the reports, do the following:
1. From the Status Reports screen, press the Up or Down pad to move the highlighted cursor to the
desired selection.
2. Press the Select pad to view the desired report page.
3. Use the Up and Down pads to move through a report that includes several screens (frames).
4. Press the Select pad to exit the report.
5. To return to the Master Menu, return to EXIT and press the Select pad.
Each report screen includes the date, time and a frame number. The frame number indicates the rela-
tionship sequence of a 4 millisecond time segment.
Figure 13 Status reports screen
NOTE
Each of the four Status Reports can be displayed on a remote terminal.
Refer to 3.2.14 - Communication Interfaces.
CURSOR UP
CURSOR DOWN
CHOOSE
UP :
DOWN :
SELECT :
PRESENT STATUS
EVENT HISTORY
HISTORY STATUS
SYSTEM STATUS
EXIT
© 1989-2003