Filter
Top Products
52
Installation & Operation Manual
9 Start-up
SETUP
BUTTON
SCROLLING
MENU FEATURE
CASCADE
BUTTON
SEND UPDATE
BUTTON
Figure 9-6 Cascade Screen
Configuration of the cascade
Note: For more detailed instructions, please refer to the Crest
Service Manual.
When installed in a Cascade system, the individual controls
must be programmed for cascade operation. Access the
Cascade Setup options as follows:
1. Press the SETUP button on the top of the display screen.
2. Enter the installer password.
3. Scroll through the scrolling menu feature to access the
Cascade option as shown in FIG. 9-6.
4. Press the CASCADE button.
5. Once all the updates are complete, press the SEND
UPDATE button at the top of the screen (FIG. 9-6) to save
changes.
Note: The SEND UPDATE button must be pressed to
ensure proper programming of the controls. Failure to press
the SEND UPDATE button will require all changes to be
reprogrammed.