Filter
Top Products
9
Section 3: Operation
The displays and settings in this digital gauge are controlled by a five-
button keypad. The buttons are
UP, DOWN, MENU, PAGES/ENTER and
EXIT. The MENU key calls up the basic menu, which allows you to set up
as many as 16 pages for display. The
UP and DOWN keys are used to
scroll through and highlight menu items. The
PAGES/ENTER key (also
referred to as the
ENTER key) allows you to scroll forward through a
series of pages and is used to select items from menus. The
EXIT key is
used to close menus and scroll backward through a series of pages.
LMF-400 keypad.
Boat Setup
When the LMF-400 powers up for the first time, the screen will show
the
Boat Setup menu. You will not be able to proceed without
completing Boat Setup, which requires you to program into the unit the
number of engines and gas tanks on your vessel. Boat Setup will only
appear again if you reset Engine/Tank configuration, add certain EP
sensors or if configuration is lost.
To complete Boat Setup:
1. With Boat Setup highlighted, press
ENTER. A menu will appear,
allowing you to choose the number of engines and fuel tanks on your
vessel. The Boat Setup menu options are: 1 Eng/1 Tank, 1 Eng/2 Tank,
2 Eng/1 Tank, 2 Eng/2 Tanks, 3 Eng/1 Tank or
3 Eng/3 Tanks.
2. Choose the option that applies to your vessel and press ENTER. After
setting the engine/tank configuration, you will need to enter the size of
each tank via the Set Tank Size menu. It will appear with up to three
options, depending on the number of tanks you chose during Boat
Setup. The options are: Port Tank, Stbd Tank and Cen Tank.
3. Select the tank you want to set up and press
ENTER. That will launch
the Setting Tank Size window. If you selected one tank during Boat
Setup, you will be taken directly to the Setting Tank Size Window.