Lowrance electronic LMF-400 Network Card User Manual


 
36
GPS Position
Displays user position in Latitude/Longitude.
Fuel Manager
The Fuel Manager page has three digital readouts capable of
displaying: Fuel Flow, Fuel Economy, Fuel Remaining, Fuel Range,
Trip Fuel Used, Seasonal Fuel, Paddle Wheel Speed, Pitot Speed and
GPS Speed. While on the Fuel Manager page, press
MENU to access the
Fuel manager menu, which contains the following options: Customize,
Fuel Setup, Pages, Screen, Audio Setup and System Setup.
NOTE
If you have multiple engines, you must go into System Setup and
select Engine Displayed. Here you can select the engine you want to
set up. The Fuel Management page shows the engine you selected
at the bottom of the page.
To Customize the Fuel Manager Page:
1. Scroll through pages set for display using the
ENTER and EXIT keys.
2. Once the Fuel Manager page is displayed, press
MENU, select
CUSTOMIZE and press ENTER.
3. The menu prompt will appear with the follow options: Top Data,
Center Data and Bottom Data. Use the
UP and DOWN keys to highlight
the data box you want to customize and press
ENTER.
4. Scroll through the list and highlight the desired item, then press
ENTER. This will take you back to the menu prompt. If you want to
customize other data, repeat the steps above, otherwise press
EXIT,
EXIT. The information you selected will be displayed on the screen.
Fuel Setup
1. To access the Fuel Setup menu, press
MENU while viewing the Fuel
Manager page, which will bring up the Fuel Manager page menu.
2. Select
FUEL SETUP, then press ENTER.
The Fuel Setup menu contains the following categories: Adjust
Calibration, Fuel Remaining Source, Reset Seasonal, Refill Tank,
Partial Fill, Eco Speed Source and
Reset Trip Fuel.
Adjust Calibration
1. From the Fuel Setup menu, select
ADJUST CAL and press ENTER.
2. Use the
UP and DOWN keys to input the desired calibration
adjustment, then press
ENTER.
Fuel Remaining Source
The Fuel Remaining Source menu prompts you to choose what sensor
will be used to monitor your fuel level. There are two options: Engine
Fuel Flow and
Fluid Level Sensor.