Filter
Top Products
22
To Change Engine (Reconfigure; active only with multiple-engine setting):
1. From a fuel flow menu, select
CHANGE ENGINE and press ENTER. That
will call up an internal menu with three options: Port, Center and
Starboard. When you select one of the three options a message appears:
Changing Device Settings. When the LowranceNET has been scanned
and all devices have been detected, you will be directed back to the Bus
Device list.
To set Fuel Warning:
1. Highlight FUEL WARNING and press ENTER, which opens a menu with
the following options: Low Level or High Level.
2. After choosing either
HIGH LEVEL or LOW LEVEL and pressing ENTER, a
Level Warning window will appear. It will be set to
OFF by default.
When setting a Fuel Warning, you should choose
LOW LEVEL, which will
warn you when the fuel level drops below a preset percentage of the
tank's capacity.
3. To set the Fuel Warning level, use the
UP and DOWN keys to select a
desired percentage and press
ENTER. You then will be directed back to
the Bus Devices list.
To Unset Engine (Unconfigure):
1. After highlighting UNSET ENGINE and pressing ENTER, a message will
pop up: Press Ent to Unconfig Dev Instance.
2. Press ENTER and you will be directed back to the Bus Devices list.,
where UnCfg F Flow will now be displayed.
To Reset Values:
1. Choose RESET VALUES, press ENTER and a message will be displayed:
Press Enter to Reset Device Values.
2. Press
ENTER to reset the device values to the default settings.
NOTE:
By resetting values from the configuration menu, ONLY the device
selected from the Bus Devices list will be set back to its defaults.
When you Reset Values, the calibration on the device is reset. But
when you unconfigure a device, its calibration is unaffected.
WARNING:
If you reset any EP, that EP will lose all configuration
and calibration.
Fluid Level
Up to three tanks for each Fluid Level category (Fuel, Fresh Water, Oil,
Black Water, Waste Water and Live Well) can be supported by the
LMF-400. On the Bus Devices list, the fuel tanks will be displayed as
Fuel Tank (P) for portside, Fuel Tank (C) for center and Fuel Tank (S)
for starboard.