Filter
Top Products
14
Page Scrolling
Once you have added the pages you want to monitor, you'll have two
ways to view them on the display. You can scroll through the pages
manually by using the
ENTER and EXIT keys or utilize the Page
Scrolling function to automatically scroll through the pages at an
interval of your choosing.
To activate Page Scrolling:
1. Press
MENU, select PAGES and press ENTER.
2. Select PAGE SCROLLING and press ENTER. The Page Scrolling menu will
appear with two settings: Off
and Set Time.
3. To set the scrolling interval, choose SET TIME and press ENTER.
4. Use the UP and DOWN keys to select an interval between one and 60
seconds. At the bottom of the Set Time display will be a message, Press
Enter when finished. After you are satisfied with the selected interval,
press
ENTER.
To turn off Page Scrolling:
To get back into the Page Scrolling menu, repeat the steps you used to
activate Page Scrolling.
But this time, when you access the Page Scrolling menu, select
OFF
instead of SET TIME.
Pop-Ups Setup
Pop-Ups Setup is accessed from the basic menu by selecting
PAGES and
pressing
ENTER. Scroll down to Pop Ups Setup and press ENTER. Four
options will appear: RPM, Engine Trim, Trim Tabs and
Stay-on Time.
The Pop-Ups feature makes it possible for you to be alerted when the
category you selected (RPM, Engine Trim, Trim Tabs) exceeds a
threshold of your choosing. When a threshold is exceeded, the main
page for the category will pop up on the main display for a preset
duration. You can choose how long the page will be displayed via the
Stay-on Time option.
RPM: If you highlight
RPM and press ENTER, a pair of menu options
will appear: Off and Set Threshold. Select
OFF to turn off a RPM pop up
or highlight Set Threshold and press
ENTER, to set a RPM threshold.
The threshold for RPM ranges from 50 to 3,000 RPM.
Engine Trim: If you select
ENGINE TRIM and press ENTER, a pair of menu
options will appear: Off and Set
Threshold. Select Off to turn off an
Engine Trim pop up or highlight Set Threshold and press
ENTER, to set
an Engine Trim threshold. The threshold for Engine Trim ranges from
3% to 50%.
Trim Tabs: If you choose
TRIM TABS and press ENTER, a pair of menu
options will appear: Off and Set Threshold. Select
OFF to turn off a Trim