Lowrance electronic LMF-400 Network Card User Manual


 
35
Quad Digital
The Quad Digital page has four digital gauges capable of displaying:
Alt Voltage, Battery Voltage, Engine Temperature, Atmospheric
Pressure, Temperature, Depth, Engine Load, Total Engine Hours, Fuel
Flow, Fuel Economy, Fuel Remaining, Fuel Range, Paddle Wheel
Speed, Pitot Speed, GPS Speed and Tachometer.
To Customize the Quad Digital page
:
1. Scroll through pages set for display by using the ENTER or EXIT key.
2. Once the Quad Digial page is displayed, press MENU, select CUSTOMIZE
and press ENTER.
3. A menu prompt will appear giving you the option to customize Data
Box 1, Data Box 2, Data Box 3 or Data Box 4.
4. Use the
UP and DOWN keys to highlight the data box you want to
customize and press
ENTER.
5. Scroll through the device list and highlight the category you want to
monitor, then press
ENTER. This will take you back to the menu
prompt. If you want to customize any of the other boxes, repeat the
steps above, otherwise press
EXIT|EXIT. The box you customized will
display the data you selected.
Trim Tabs
The Trim Tab page can display Trim Tabs position in percentages and
degrees, giving boaters precise control of Trim Tab position.
To Customize Trim Tabs:
1. Scroll through the pages set for display, pressing
MENU when the
Trim Tab page is on the main display.
2. Select
CUSTOMIZE and press ENTER.
3. There will be two choices: Percentage or Degrees.
4. Choose the desired unit of measure and press ENTER. The Trim Tab
page displays position information in the unit of measure you chose.
Trim Tabs page (left), GPS Module page (center) and Fuel Manager
Page (right).