Lowrance electronic LMF-400 Network Card User Manual


 
32
NOTE
The System Setup menu for all three analog gauges feature Speed
Range and Pressure Range. A more detailed description of Speed
Range and Pressure range may be found under System Setup later
in this section.
Single Analog page (left) with Dual Analog page (right).
Dual Analog
A pair of analog gauges, the Dual Analog page may be customized to
show information from any of the following: Alt Voltage, Battery
Voltage, Engine Temperature, Atmospheric Pressure, Temperature,
Fluid Level, Paddle Wheel Speed, Pitot Speed, GPS Speed and
Tachometer.
To customize the Dual Analog page:
1. Scroll through the pages set for display by pushing the
ENTER or EXIT
key.
2. Once the Dual Analog page is displayed, press MENU, select CUSTOMIZE
and press ENTER.
3. A menu prompt will appear giving you the option to customize the
Top Gauge or the Bottom Gauge. Use the
UP and DOWN keys to
highlight the desired gauge and press
ENTER.
4. Scroll through the device list and highlight the category you want to
monitor, then press
ENTER. This will take you back to the menu
prompt. If you want to customize the other portion of half of the gauge
repeat the steps above, otherwise press
EXIT, EXIT. The information you
selected will be displayed on the screen.
Quad Analog
A display featuring four analog gauges, the Quad Analog page
supports: Alt Voltage, Battery Voltage, Engine Temperature,
Atmospheric Pressure, Temperature, Paddle Wheel Speed, Pitot Speed,
GPS Speed and Tachometer.