Filter
Top Products
LSI Corporation | September 2010 Page 45
LSISAS6160 SAS Switch User Guide Chapter 3: SAS Domain Manager Graphical User Interface
| Domain Tab
3.6.3.2 View Zone Group Use the View Zone Groups command to view information about zone groups. To view
details about any zone group, select the group from the pull-down list on the left. An
asterisk at the end of a zone group name indicates that the zone group was active at
the time of activation. Figure4 shows the View Zone Group window.
3.6.3.3 Modify Zone Group Use the Modify Zone Groups command to modify existing zone groups. You can add or
remove phys or rename an existing zone group. The list of unselected zone group
members contains only the expanders and phys that are inside the ZPSDS boundary. As
the following figure shows, you rename a zone group by selecting the zone group from
the pull-down list at the upper left, typing a new name, and clicking Apply.
Figure 9: Modify Zone Group
3.6.3.4 Delete Zone Group
Use the Delete Zone Group command to delete an existing zone group. You can delete
any zone group that is not currently a member of any zone set. Select the zone group
name from the pull-down list in the upper left and click Delete.