Filter
Top Products
LSI Corporation | September 2010 Page 63
LSISAS6160 SAS Switch User Guide Chapter 4: SAS Domain Manager Command Line Interface
| SDM-CLI Commands
4.2.7 Show Command (Intra-Domain) Use the show command to display domain, device, and phy
information. (See Section4.3, Sample Output for Show Command, to view samples of
the kind of information that is returned.)
Authority: User
Syntax:
show alias [<alias>]
show device [<sas address>|<alias>]
show domain
show phy [(<sas address>|<alias>)[:<phy>]]
show version
show zonegroup [<name>]
show zoneset [active|data <name>]
Usage:
show alias
Displays a list of all aliases.
show alias <alias>
Displays detailed information for a single alias.
show device
Displays a table of all devices (expanders and end devices) in the domain.
show device <sas address>|<alias>
Displays detailed information about a particular device (expander or end device).
SES environmental data is a subset of the information displayed for expanders.
show domain
Displays all domain overlays and their bindings to physical domains, flagging the
domain currently under focus.
show phy
Displays, in a tabular format, all expander phys residing in the domain.
show phy (<sas address>|<alias>)
Displays, in a tabular format, all phys residing on a specific expander.
show phy (<sas address>|<alias>):<phy>
Displays detailed information about a particular phy.
show version
Displays version information for both SDM-CLI and SDM-D.
show zonegroup
Displays a list of all zone groups.
show zonegroup <name>
Displays detailed information about a single zone group.
show zoneset
Displays a list of all zone sets.
show zoneset active
Displays the name and detailed information for the active zone set.
show zoneset data <name>
Displays detailed information about a single zone set.