Filter
Top Products
AccessIT
44
If this DX User IP II is the IP device connected to User port 1 of the DX Central,
select the Master Console checkbox. (This enables the DX port statuses to be
displayed in the AccessIT interface). If this unit is not the Master console, select
the User port this device is connected to from the Console port drop-down list and
select the Master device from the Master device drop down list.
Note! When there are more than one DXU IP II units in the system you must select
the KVM switch file for all DXU IP II units.
8.4 Targets
The Targets you created appear in the Targets list.
You can choose to display all Targets or just unassigned Targets (default) or
Targets belonging to a Target set. Select the desired option from the Show Targets
drop-down menu.
You must associate the Targets with the relevant IP device or with the port
numbers on the KVM switch to which they are physically connected.
To associate the Targets:
1. From the Targets list, double-click the Target connected port #1 of the KVM
switch. The Target assigns to the port #1 of the Ports section. Alternatively drag
and drop the Target to the correct port number.
2. Repeat the above step for all Targets connected. Ensure the right Target assigns
to the correctly numbered port.
To remove a Target from a port:
Double-click the Target in the Ports section. The Target name moves to the Target
section and is now unassigned.
Note! Deleting a Target removes its association with the KVM port number. See
page 35.
When there is more than one DXU IP II units or if there are multi-user matrix
KVM switches in the system, you must assign the same Targets to the same ports
for each DXU IP II unit/matrix KVM switch.
1. Assign the ports for one DXU IP II unit/matrix KVM switch.
2. Go to the Devices page and select the next DXU IP II unit/matrix KVM switch.
3. Click the Targets tab and in the Show Targets drop-down menu select All
Targets.
4. Go down the list and again assign the same Targets to the same ports for this
DXU IP II unit/matrix KVM switch.