Filter
Top Products
AccessIT
68
11. Configuring Access services for individual Targets
As explained in section 10.3, the Access service default values are set globally in
the Settings section of the menu – in Applications/Access Services. The following
sections explain how to configure each Access service for individual Targets.
You configure the Access Services for each Target from the Access Services tab,
as follows:
1. From the Management menu, select Targets, the Targets page appears see
Figure 64.
Click here to display
the Targets page
Total number of
Targets in the
system
Click a name to edit
Target properties
Figure 64 Target page
2. For new Targets click the New Target button, for existing Targets click the
target name in the name column. The Access Services tab appears.
11.1 Default access service
You can set any of the access services to be the default service. This means that the
service will be used to access the Target by default when selecting the Target
name. To access the Target via a different service, the service must be selected. To
set a service as the default, display the service as explained below and select the
Set as Default Service checkbox.
11.2 Minicom PX Serial
To configure a Minicom PX Serial:
1. From the All Services list, select the Minicom PX Serial checkbox. Minicom
PX Serial now appears in the Active Services list.
2. Click Minicom PX Serial. The Minicom PX Serial settings appear, see Figure
65.