Filter
Top Products
USER GUIDE
89
14. Attached Devices
Attached Devices refers to Power Distribution Units (PDU), KVM switches and
Console servers physically connected to the system’s Targets. You must select the
devices attached to the system.
14.1 Selecting PDUs
To select a PDU type:
1. From the Settings/Attached Devices menu, select PDU, the PDU page appears
showing a list of PDU types, see Figure 83.
Figure 83 PDU page
The columns show the following:
· Model - PDU model
· Manufacturer - PDU manufacturer
2. From the list, select the PDU brands and models physically connected to your
Targets.
3. Press . The selection is saved. The PDU appears in the management
section in the drop-down list of PDUs (see page 49).
14.1.1 Uploading a new PDU model
If a PDU is not listed, contact Minicom at support@minicom.com to obtain a new
PDU definition file.
When you receive the file do the following: