Filter
Top Products
USER GUIDE
45
When selecting a Target the AccessIT checks which DXU IP II unit/IP device
connected to a matrix KVM switch, is available and automatically connects
you to the chosen Target. If a local DX User is accessing the port View Only is
available.
8.5 Network tab
In the Network tab you configure and modify Network parameters of the IP device.
Click the Network tab. The following appears.
Figure 40 Network tab
Interface I displays the IP address of the IP device as discovered by the AccessIT
Manager system. You can change this address here.
Enter IP address, Subnet Mask and Default Gateway for the network adapter, as
given by your Network Administrator.
In TCP Port type a port number (from 800 and up to 65535). By default the port
number is 900. This default port is suitable for the majority of installations.
Click to clear or select the following according to your requirements:
DHCP – Enable DHCP to provide you with dynamic IP addressing for the IP
device, if a DHCP server exist.
Note: Any change in the Network configuration forces the IP device to restart.