Filter
Top Products
7. Settings and Operations for Scan Functions
96
Controller Setting
■
Internet Fax Transmission Setting
To make the settings, use the same screen as that used for setting for Scan to E-mail.
(The same transmission settings are made for Scan to E-mail and Internet Fax.)
■
Reception Setting
Set the mail server (POP3 server) to enable mail reception from the lnternet FAX.
Setting from PageScope Light
1. Start PageScope Light.
2. Enter the password and log on to the Administrator mode.
3. From the “Network” tab, select “E-mail/Internet FAX” – “Receive.”
4. Set the following items.
POP3 Server : Set the IP address of the POP3 server.
POP3 Login Name : Set the logon name of the POP3 server.
Setting value : 63 alphanumeric characters
POP3 Password : Set the password used when logging on to the POP3
server.
Setting value : 15 alphanumeric characters
4334P176CA