Filter
Top Products
6. Printing
60
6.12 Printing on Paper from Manual Bypass Tray
The Manual Bypass Tray can be selected as the paper source for printing.
1. Select the “Setup” tab.
2. Select “Manual Feed Tray” from the “Paper Source” list.
3. Click “OK” twice to send the job.
4. Load the Manual Bypass Tray of the copier with paper.
NOTES
• Place one sheet of paper at a time.
• To use paper of A4, B5, or Invoice (5-1/2
×
8-1/2) size, place the paper
crosswise on the Manual Bypass Tray.
(Touching the job displayed on the copier control panel will display
instructions on how to place the paper. Load the paper according as
instructed.)