Mitsubishi Electronics WL7200U Projector User Manual


  Open as PDF
of 68
 
EN-20
C. Installing the terminal cover
This projector includes a terminal cover. If necessary, install the terminal cover to the projector.
1. Fit two hooks of the terminal cover into the projector.
(a)
Viewing computer images (continued)
Important:
• Don’t carry the projector by the terminal cover.
2. Tighten the attachment screws (a) firmly.
Caution:
• Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.
• Do not plug in or out the power cord with your hand wet. It may cause electric shock.
• Donotturnonthepowerbeforeattachingthelens.Thecabinetmaybeexposedtothelightfromthelamp
directly and heated to a high temperature, resulting in deformation.
• Whenyoumovetheprojector,turnoffthepower,unplugthepowercordfromthewalloutlet,andthenremovethe
connected cords. Otherwise, the power cord may be damaged, resulting in fire or electric shock.
• Ifdustormetallicsubstanceisonoraroundthepinsofthepowerplug,unplugthepowercordandcleanitusing
a dry cloth. If you continue to use the projector without cleaning, it may result in fire or electric shock. Clean the
power plug periodically at least once a year.
• Besuretounplugthepowercordfromthewalloutletiftheprojectorwillnotbeusedforalongperiodoftime.
Otherwise, it may cause fire.
 previous next