Mitsubishi Electronics WL7200U Projector User Manual


  Open as PDF
of 68
 
EN-32
IMAGE menu
COMPUTER
0
COLOR
0
TINT
0SHARPNESS
ADVANCED MENU
NCM
SUPER RESOLUTION
IMAGE
BRIGHTNESS 0
COLOR ENHANCER
AUTO
CONTRAST
STANDARDCOLOR TEMP.
opt.
IMAGE
ADVANCED MENU
opt.
AUTO IRIS
NOISE REDUCTION
CTI
0
INPUT LEVEL
OFF
CLOSED CAPTION
ON
OFF
OFF
0
ENTER
ON
ITEM SETTING FUNCTION
COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal.
(Select this option for normal use.)
PRESENTATION Select to make the displayed image look bright and crisp.
STANDARD Select to make the displayed image look natural.
THEATER This option, suitable for viewing movies, makes the displayed image look soft
and smooth.
sRGB Select to give priority to the color reproducibility.
USER Select to set the gamma curve. (See page 40.)
CLEAR BASE Select to obtain the color close to that of the X-ray film (clear base).
BLUE BASE Select to obtain the color close to that of the X-ray film (blue base).
SUPER RESOLUTION ON / OFF Use to emphasize the fineness of the image. (See page 41.)
CONTRAST ±30 Use to adjust the contrast of the projected image. (See page 39.)
BRIGHTNESS ±30 Use to adjust the brightness of the projected image. (See page 39.)
NCM COMPUTER / VIDEO Use to adjust the predetermined tone of each color.
USER Use to emphasize only certain colors or to correct the tonal deviation of only
certain colors. (See page 41.)
OFF NCM doesn’t work.
COLOR TEMP. STANDARD / LOW /
HIGH
Select from the predetermined color temperatures.
USER Use to adjust the color temperature to a desired value. (See page 39.)
COLOR ±10 Use to adjust the color thickness of the projected image. (See page 39.)
TINT ±10 Use to adjust the color tint of the projected image. (See page 39.)
SHARPNESS ±5 Use to adjust the sharpness of the projected image. (See page 39.)
ADVANCED MENU ENTER The ADVANCED MENU is displayed for the following settings.
AUTO IRIS ON / OFF
Select the operation mode of the auto iris.
When ON is chosen, the iris is automatically adjusted depending on the image
being displayed. When OFF is chosen, the iris is kept fully opened.
NOISE REDUCTION ON / OFF
Use to reduce noise and roughness in the image when noisy video signal is input.
CTI ON / OFF Use to correct smeared color boundaries.
INPUT LEVEL ±5 For analog signal input:
The input level of video signal differs among devices to be connected. High
input level causes solid white in displayed image and low input level causes
displayed image to get dark. Use this menu to adjust the input level of analog
video signal.
AUTO /
ENHANCED /
NORMAL
For digital signal input:
AUTO: The proper setting is automatically selected. (Selectable only
when HDMI signal is input.)
ENHANCED: Select when solid black occurs.
NORMAL: Select when grayish black occurs.
(See page 27.)
CLOSED CAPTION OFF Does not display captions.
CC1 / CC2 Displays captions.
• WhenCOLORENHANCERissRGB,CLEARBASEorBLUEBASE,COLORTEMP.,COLOR,TINT,NCMandAUTOIRIScan’t
be adjusted.
• WhenthesettingofCOLORENHANCERischanged,thedisplayedimagemaybedisturbed.
• ThisproductisnotincompliancewithDICOMPart14.Donotusethisproductforactualmedicaldiagnosis.
• TheeffectobtainedwhenSUPERRESOLUTIONisONvariesdependingonthetypeandresolutionoftheinputimage.
• WhentheCOMPUTER1,COMPUTER2,DVIorHDMIisselectedastheinputsource,COLORandTINTcan’tbeadjusted.
• TINTisavailableonlywhentheNTSCsignalisinput.
• INPUTLEVELisunavailablewhenthedigitalsignalissuppliedfromtheYC
B
C
R
/YP
B
P
R
terminal of the connected device.
• Captionsarenotdisplayedwhileinformationaboutthemenuorinputsignalselectionisbeingdisplayedonthescreen.
• TheclosedcaptionfunctiondisplaystextinformationincludedintheNTSCsignal,whichismainlyusedforTVbroadcastingin
North America.
Menu operation (continued)
 previous next