Filter
Top Products
EN-47
Initialization of Network Settings
(See page 31 for menu setting.)
1. Display the NETWORK menu.
2. Press the or button to select NETWORK
RESET.
NETWORK RESET
OK
3. Press the ENTER button.
• Conrmationdialogappears.
4. Press the ENTER button again, and the Network
Settings can be initialized (except for IP CONFIG).
• Tocanceltheinitialization,presstheMENU
button.
• AlertE-mailsettingisalsoreset.Fordetails
about Alert E-mail function, see “LAN control
UTILITY operation manual” in the CD-ROM.
• Itmaytakesometimetoreectthesettings.
How to Use Network Function
• Whenconnectingacomputerandprojectorwith
LAN, configure the both IP Addresses in the
same network group.
If connecting in different network group, be sure
to use a router. As for the settings of a router, ask
the network administrator.
• ConguretheIPCONFIGcorrectly.Ifthesettings
are not correct, the communication may be
unavailable. For the detail, consult the network
administrator.
• Dependingonthesettingsofstandbymodeof
the projector, LAN function may be unavailable.
See page 33 for the detail of standby mode.
Initial network settings (continued)
Glossary
For more detail of the glossary below, refer to the
technical book that is commercially available.
Term Description
DHCP
Abbreviation for Dynamic Host
Configuration Protocol. This
protocol automatically assigns IP
Address to networked devices.
IP Address
Numerical address to identify
networked computers.
Subnet Mask
A numeric value to define the
number of bits used for a network
address of a divided network (or
subnet) in an IP Address.
Default Gateway
A server (or router) to communicate
across networks (subnets) that are
divided by Subnet Mask.
MAC Address
Abbreviation for Media Access
Control Address. MAC Address is a
unique ID number assigned to each
network adapter. And this is based
on which data are sent and received
between network adapters.