EN-12
Setting up your projector (continued)
Front projection, ceiling mounting
For ceiling mounting, you need the ceiling mount
kit designed for this projector. Ask a specialist for
installation. For details, consult your dealer.
• Thewarrantyonthisprojectordoesnotcoverany
damage caused by use of any non-recommended
ceiling mount kit or installation of the ceiling mount
kit in an improper location.
• Whenusingtheprojectormountedontheceiling,
set IMAGE REVERSE in the INSTALLATION menu
to MIRROR INVERT. See page 30.
• Whentheprojectorismountedontheceiling,
images may appear darker than those projected in
the case of tabletop mounting. This isn’t a product
malfunction.
• Askyourinstallationspecialisttoprovideabreaker.
When you do not use the projector, be sure to shut
down the main power by the breaker.
• Donotinstalltheprojectorwheretheexhaustvents
are exposed to air emitted by an air conditioning.
Such installation may cause a breakdown.
• Donotinstalltheprojectorneararealarm
because it emits hot air from its exhaust vents.
Rear projection
Ask a specialist for installation. For details, consult
your dealer.
• Forrearprojection,setIMAGEREVERSEinthe
INSTALLATION menu to MIRROR. See page 30.
Caution:
• Placingtheprojectordirectlyonacarpetimpairs
ventilation by the fans, causing damage or failure.
Put a hard board under the projector to facilitate
ventilation.
• Placetheprojectoratleast50cm(or20inches)
away from the wall to prevent the air inlet grille and
the air outlet grilles that emit hot air from being
blocked.
• Donotusetheprojectorinthefollowinglocations
and manners, which may cause fire or electric
shock.
• Inadustyorhumidplace.
• Inasidewaysposition,orwiththelensfacing
down.
• Nearaheater.
• Inanoily,smoky,ordampplacesuchasakitchen.
• Indirectsunlight.
• Wherethetemperatureriseshigh,suchasina
closed car.
• Wherethetemperatureislowerthan+41ºF(or
+5ºC)orhigherthan+95ºF(or+35ºC).
Important:
• Wedon’trecommendusingtheprojectoratan
altitude of 1500 meters or higher. Use at an altitude
of 1500 meters or higher may affect the projector’s
life.