Mitsumi electronic WD3300U Projector User Manual


  Open as PDF
of 52
 
EN-29
Menus displayed in the DETAIL MENU mode
IMAGE menu
IMAGE
opt.
CONTRAST
BRIGHTNESS
0
0
STANDARD
0
0
COLOR
TINT
COLOR TEMP.
0
SHARPNESS
AUTO
COLOR
ENHANCER
OK
ADVANCED MENU
IMAGE
ADVANCED MENU
opt.
ON
ON
NOISE REDUCTION
CTI
INPUT LEVEL
0
ITEM SETTING FUNCTION
COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal.
(Select this option for normal use.)
PRESENTATION Select to make the displayed image look bright and crisp.
STANDARD Select to make the displayed image look natural.
THEATER This option, suitable for viewing movies, makes the displayed image look soft
and smooth.
sRGB Select to give priority to the color reproducibility.
USER Select to set the gamma curve, set BrilliantColor™ or adjust the color
intensity or color balance as desired. (See page 34.)
CONTRAST
±30
Use to adjust the contrast of the projected image. (See page 33.)
BRIGHTNESS ±30 Use to adjust the brightness of the projected image. (See page 33.)
COLOR TEMP. STANDARD / LOW /
HIGH
Select from the predetermined color temperatures.
USER Use to adjust the color temperature to a desired value. (See page 34.)
COLOR ±10 Use to adjust the color thickness of the projected image. (See page 33.)
TINT ±10 Use to adjust the color tint of the projected image. (See page 33.)
SHARPNESS ±5 Use to adjust the sharpness of the projected image. (See page 33.)
ADVANCED MENU OK The ADVANCED MENU is displayed for the following settings.
NOISE REDUCTION ON / OFF Use to reduce noise and roughness in the image when noisy video signal is
input.
CTI ON / OFF Use to correct smeared color boundaries.
INPUT LEVEL ±5 For analog signal input:
The input level of video signal differs among devices to be connected. High
input level causes solid white in displayed image and low input level causes
displayed image to get dark. Use this menu to adjust the input level of analog
video signal.
ENHANCED /
NORMAL
For digital signal input:
When a digital signal is input, ENHANCED and NORMAL are switchable. (See
page 22.)
• WhenCOLORENHANCERissRGB,COLORTEMP.,COLORandTINTcan’tbeadjusted.
• WhenthesettingofCOLORENHANCERischanged,thedisplayedimagemaybedisturbed.
• WhentheCOMPUTER1,COMPUTER2,DVIorHDMIisselectedastheinputsource,COLORandTINTcan’tbeadjusted.
• TINTisavailableonlywhentheNTSCsignalisinput.
• INPUTLEVELisunavailablewhenthedigitalsignalissuppliedfromtheYC
B
C
R
/YP
B
P
R
terminal of the connected device.
Menu operation (continued)
 previous next